Summary of common problems of analysis blow molding machine

Everyone may be very familiar with bottle blowing machines. The most important thing is the machine equipment used to blow bottles. The bottle blowing machine can blow plastic particles or softened liquids into people through certain technological means. Compared with other raw materials, plastic hollow containers are not only light in weight and low in price, but also very safe. They can be seen everywhere in our lives, especially all kinds of beverages used at home. Bottles, etc. are all made of plastic as raw materials, which brings more and more convenience to people. However, what should people do if they use the bottle blowing machine?

1. Before using the bottle blowing machine, you should carefully check whether the moving parts are firm, and you also need to carefully check whether the screws are loose. If so, they should be tightened in time to ensure safety and stability during use. sex.

2. Where the impact force is very strong, it should be checked whether the belt drive part is normal, whether there is serious wear and tear, it needs to be replaced and treated, and it is also necessary to add lubricating oil to each part to ensure the service life of the mechanical equipment Longer.

Maintaining the blow molding machine in accordance with a certain order can not only ensure the normal production of the product, but also extend the use time of the machine and equipment. Therefore, in addition to the maintenance of the blow molding machine, the following maintenance rules must be implemented correctly to improve product quality and productivity.
1. If the blow molding machine fails, repair it as soon as possible. If it can be repaired during power outages or product replacement operations, this will help reduce downtime and will never delay machine production.
2. The parts that affect the blowing quality of the bottle blowing machine need to be replaced or repaired every six months. If there are parts that affect the quality of the bottle blowing, it can be used for a longer time, which can reduce the maintenance cost.
3. If a large area of ​​the bottle blowing machine is to be repaired, it is best to repair it at the time of the glass melting furnace for maintenance to avoid the bottle blowing machine from stopping during the production process.