What systems are included in the maintenance of the blow molding machine

Update: 2022/09/23
Abstract:

Strengthening the maintenance of the blow molding machi […]

Strengthening the maintenance of the blow molding machine is one of the indispensable conditions to ensure normal production and prolong the service life of the equipment. Correctly arranging the overhaul, medium repair and minor repair plans of equipment is of great significance to improve product quality.

1. Overhaul
The overhaul time should be carried out within the time of the overhaul of the glass melting furnace as much as possible. Mainly carry out a comprehensive and thorough repair of the blow molding machine. All parts that need to be replaced should be replaced to avoid downtime in the production process. Generally, it should be considered that they can be used for the next overhaul. The parts that are usually replaced in the overhaul are: piston rod, piston, rack, gear, spline shaft, spline sleeve, hinge pump and various shaft sleeves.
2. middle school
Generally once every six months, the main parts that affect the quality of blowing are replaced and repaired. If the parts that do not affect the quality of blowing can be used, try to spend as much time as possible to avoid waste. The parts that are often replaced are: small shaft, small sleeve, seal trap, bottle clamp, etc.

3. minor repairs
The blow molding machine can be repaired at any time when it breaks down. It is best to use the replacement product or when the power is cut off, so as to reduce the downtime.
In order to strengthen the management of the blow molding machine and improve the maintenance quality, the blow molding machine should establish an operation and maintenance status card, which includes the time when the equipment is put into production.

0
Views: 2,930
Contact Us