Common features of various automatic blow molding machines

Update: 2022/02/14

There are many kinds of automatic blow molding machines […]

There are many kinds of automatic blow molding machines, and we must pay attention to selecting the appropriate model for production when we use them. Below we have come into contact with one of them, and we can take a look at its characteristics.
Features of automatic blow molding machine:
1. Each heating area is equipped with independent segmented temperature control; the position and distance of lamps and reflectors in the heating area can be adjusted according to the different shapes and sizes of the preforms to achieve the ideal heating effect.

2. The heating of the preform by the infrared lamp is controlled by means of constant pressure and temperature regulation, so as to ensure that the heating of the preform is appropriate, accurate and stable, and is not affected by the change of the input voltage.
3. According to the needs of different products, this automatic bottle blowing machine can be matched with two-chamber double-stretching cylinder, three-chamber three-stretching cylinder, four-chamber four-stretching cylinder or six-chamber six-stretching cylinder. Adjust the use of a single-cavity single-stretching cylinder to meet the different needs of machine adjustment or mold trial.
4. The control system is equipped with an automatic fault reporting function; when the operation is wrong or a fault occurs, the computer will display and issue an alarm.
5. The mold replacement is convenient and quick, and the thickness of the mold capacity does not need to be adjusted within the mold capacity range of the corresponding machine.
6. This automatic bottle blowing machine is suitable for blowing cold and hot filling plastic bottles or other plastic containers from 30 ml to 5 liters.
7. The production process is fully automated, and multiple machines can be combined into a fully automatic production line at the same time. The entire production process does not require manual contact with preforms or finished bottles.

Views: 2,753
Contact Us