• Share the operation of the blow molding machine

    Share the operation of the blow molding machine

    Precautions before starting: 1. When the machine starts to warm up, first turn on the cooling water of the barrel. The heating time is when the temperature of each section reaches the set process temperature, the material can be squeezed after holding for 30 minutes. During the heating period, the s... read more

    Oct 19,2021 News
  • Share the introduction of PET plastic bottle blowing process

    Share the introduction of PET plastic bottle blowing process

    With the continuous progress of science and technology and the scale of production, the degree of automation of PET blow molding machines is getting higher and higher, and the production efficiency is getting higher and higher. The production capacity of the equipment has increased rapidly, from the... read more

    Oct 12,2021 News
  • What are the common technical problems of PET blow molding machine?

    What are the common technical problems of PET blow molding machine?

    The blow molding process is a two-way stretching process. In this process, the PET chains are extended, oriented, and arranged in two directions, thereby increasing the mechanical properties of the bottle wall, improving the tensile, tensile, and impact strength, and have a lot of Good air tightness... read more

    Oct 08,2021 News
  • The bottom of the bottle blown by the bottle blowing machine is not shaped?

    The bottom of the bottle blown by the bottle blowing machine is not shaped?

    The bottle blowing machine is mainly used to blow the bottle preforms. Many users feedback that the bottom of the bottle from the bottle blowing machine is not formed. There are many reasons for the bottom of the bottle. Causes and solutions. 1. Reasons for heating at the bottom of the bottle At pre... read more

    Sep 29,2021 News
  • How to adjust the production speed and temperature of the automatic bottle blowing machine?

    How to adjust the production speed and temperature of the automatic bottle blowing machine?

    1. Temperature adjustment of automatic bottle blowing machine When the automatic bottle blowing machine is processing, some temperature control must be paid attention to to ensure that a suitable plastic bottle is manufactured. 1. Melting temperature TM: For crystalline polymers, it refers to the te... read more

    Sep 22,2021 News
  • What is the future trend of the blow molding machine industry

    What is the future trend of the blow molding machine industry

    As my country's demand for various plastic bottles (barrels) continues to increase, the blow molding industry is also growing. In recent years, the sales of blow molding machines have been better than before. At present, Chinese blow molding machine manufacturers have developed the core system of bl... read more

    Sep 15,2021 News
  • Introduction of blow molding machine and answers to common questions about blow molding

    Introduction of blow molding machine and answers to common questions about blow molding

    Bottle blowing machine introduction 1. The type of blow molding machine. At present, the two-step PET blow molding machine includes a rotary automatic blow molding machine, a linear automatic blow molding machine, and a manual semi-automatic blow molding machine. 2. The structural part of the bottle... read more

    Sep 09,2021 News
  • 8 common faults and troubleshooting methods of blow molding machines

    8 common faults and troubleshooting methods of blow molding machines

    8 common faults and troubleshooting methods of blow molding machines: Fault 1: PET bottle transparency is not good reason: 1. The heating temperature is too high 2. Heating time is too long 3. Compressed air contains water 4. The injection embryo tube itself is opaque 5. The embryo tube design is no... read more

    Sep 03,2021 News
  • Comparison of blow molding machine and blow molding machine

    Comparison of blow molding machine and blow molding machine

    Explain in a broad sense that the blow molding machine is also a kind of blow molding machine! Fully automatic blow molding machines include blow molding machines, hollow molding machines, injection blow molding machines and the more commonly used two-step blow molding machines, etc.! Simply put, it... read more

    Aug 24,2021 News
  • The difference between automatic bottle blowing machine and semi-automatic bottle blowing machine

    The difference between automatic bottle blowing machine and semi-automatic bottle blowing machine

    Blow molding machines are mainly divided into three categories: extrusion blow molding machines, injection blow molding machines and special structure blow molding machines. The processing technology is mainly divided into one step and two steps. At present, most bottle blowing machines are still a ... read more

    Aug 17,2021 News
  • Share blow molding machine installation method

    Share blow molding machine installation method

    Blow molding machine installation: 1. The layout of the machine The layout of the machine in the workshop should meet the convenience of mold replacement and maintenance. Generally, leave a space of 1 to 1.5 meters around it, and there should be a distance of about 2 meters between the two machines.... read more

    Aug 11,2021 News
  • How to use the blow molding machine?

    How to use the blow molding machine?

    The use of mineral water bottle blowing machine pay attention to the use of mineral water bottle blowing machine is mainly used to blow mineral water bottles of machinery and equipment, it can blow plastic particles or preforms into bottles through certain technological means, for people in life It ... read more

    Aug 04,2021 News
Contact Us