Precautions for maintenance of hollow blow molding machine: 1. The bottle cannot be taken out of the mold after blowing. First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the dry running state, if it is normal. Please check your exhaust t... read more
Reasons for Air Leakage in Automatic Blow Molding Machine 1. Is the pressure of the sealing cylinder enough? If the low-pressure sealing cylinder is selected, the low-pressure pressure can be kept below 8 kg, which is no problem for ordinary water bottles. But it also depends on the high-pressure bl... read more
1. Light box water channel high temperature alarm. Treatment method: Disassemble the water channel connecting rubber pipe, use low pressure gas and alcohol to purge and clean the water channel. 2. Gripper failure Solution: Adjust the height of the slide table, or the position of the gripper. 3. Acti... read more
There are many kinds of automatic blow molding machines, and we must pay attention to selecting the appropriate model for production when we use them. Below we have come into contact with one of them, and we can take a look at its characteristics. Features of automatic blow molding machine: 1. Each ... read more
The preform and its heating, pre-blow (position, pressure and flow), stretch rod, high pressure blowing (pressure, position) and mold, etc. These are the factors in the process that affect the bottle blowing machine to make the bottle. 1. Preform The preform, also known as the parison, is made of PE... read more
1. No feeding at the feeding position: several situations need to be checked: Whether the hopper has run out of material, if so: need to add material quickly No: please check whether the control contactor of the hoist is powered on. If it is powered on, quickly check whether the motor is powered on ... read more
1. Preform conveying mechanism: The unique preform mandrel conveying mechanism ensures that the preform has no risk of being reversed during heating. 2. High-speed operation of the clamping mechanism: the arc of the invention patent with independent intellectual property rights is the clamping struc... read more
People use various plastic products and equipment in life, especially plastic bottles, which not only have good performance characteristics, but also are very convenient to use. Compared to glass bottles, they are not only lightweight and small, but also won't shatter. Therefore, they are widely use... read more
With the continuous improvement of people's living standards, people often use many different bottles in their lives, especially some beverage bottles, which not only bring convenience to people, but also very convenient to use. These bottles are mainly manufactured with blow molding machines, which... read more
Because the separation layer of the PET bottle blowing machine is inside the bottle, it can avoid being damaged on the eve of storage, so that the product can reach a relatively long shelf life. Tests have shown that this blow molding machine achieves very good results regardless of the quality of t... read more
With the continuous progress of science and technology and the scale of production, the degree of automation of PET blow molding machines is getting higher and higher, and the production efficiency is getting higher and higher. The production capacity of the equipment has increased rapidly, from the... read more
In recent years, with the rapid development of the domestic plastic bottle market, the plastic bottle blowing machine industry has ushered in a development opportunity. The blow molding machine is a fully automatic stretch blow molding equipment. In other words, it is a machine used to blow bottles:... read more